PSA BlueHDi AdBlue Urea Pump Motor Repair Kit - (MGIC-SCR01)
Parameter | Specification |
Size | 57.5x26.6mm |
Voltage | 12V DC |
Motor type | Brushed DC motor |
Rated Load | weight load 180g.cm
|
Working Temp Range | -40℃ ~ +85℃ / 30% ~ 95%RH |
Packaging includes | electrical motor*1, Stainless steel motor spacer washer*1 |
Notes:
To ensure correct actuator selection and installation:
- Clean Urea Lines Before Installation:
Thoroughly flush and clean the internal pump casing and lines to clear crystallized urea residue before installing the new motor.
- Inspect PCBA and Pressure Sensor:
Verify that the PCBA control board and pressure sensor are functioning properly, as motor burnout is sometimes triggered by a shorted board or blocked injection valve.
- OE Identification Assistance:
If you are unsure whether this product matches your vehicle or urea pump model, SACER technical support staff will assist you with identification. Please provide a clear photograph of your original sensor and pump tag prior to ordering.
Category | Application Information |
System Compatibility
| • PSA BlueHDi Selective Catalytic Reduction (SCR) System • AdBlue / DEF (Diesel Exhaust Fluid) Dosing Pump Module |
Vehicle
| • Peugeot: 208, 308, 508, 2008, 3008, 5008, Partner, Rifter, Expert, Boxer • Citroën: C3, C4, C4 Cactus, C4 Picasso / Grand Picasso, C5 Aircross, Berlingo, Jumpy, Jumper • DS Automobiles: DS3, DS4, DS5, DS7 Crossback • Opel / Vauxhall: Corsa F, Astra K/L, Crossland X, Grandland X, Combo, Vivaro (2018+ PSA) |
Engine
| • 1.5 BlueHDi (Euro 6d / Euro 6.3) • 1.6 BlueHDi (Euro 6 / Euro 6b) • 2.0 BlueHDi (Euro 6 / Euro 6.2) |
Engine Codes
| • 1.5 HDi: DV5RC (YHZ), DV5RD (YHV), DV5RE (YHW) • 1.6 HDi: DV6FC (BHZ/BHX), DV6FD (BHY), DV6FE (BHW) • 2.0 HDi: DW10FC (AHW/AHR), DW10FD (AHR/AHX), DW10FU (AHN) |
Refer. NO
| - 9807394780 / 98 073 947 80 - 9812914780 / 98 129 147 80 - 9827948380 / 98 279 483 80 - 1682620380 / 16 826 203 80 - 1682615880 / 16 826 158 80 - 9812678180 / 98 126 781 80 |
RELIABILITY & PROVEN QUALITY
1.R&D Innovation Center
Advanced engineering team with 18+ years of turbo system expertise, utilizing CAD/CAE simulation and rapid prototyping for continuous product innovation
2.Comprehensive Testing Lab
Full-spectrum validation including durability cycles, thermal shock (-40°C to +150°C), vibration resistance, and EMC compliance testing
3.Quality Management System
IATF 16949:2016 & ISO 9001:2015 certified production with 100% incoming inspection, in-process monitoring, and final performance verification
END-TO-END ACTUATOR SOLUTIONS
From application evaluation to global delivery, SACER provides reliable actuator solutions and services for OEM and aftermarket customers worldwide.
1 Product Identification & Model Matching
Based on the product information provided by the customer—such as OE number, turbocharger model, or product photos—we provide actuator model identification and matching services to help quickly find the correct replacement.
2 Flexible Customization & Quality Assurance
We provide flexible customization options supported by strict quality control and validation processes to ensure stable and reliable product performance.
3 Global Delivery & Technical Support
Our global logistics network and responsive technical support ensure efficient product delivery and long-term cooperation.
WARRANTY & AFTER-SALES SUPPORT
SACER provides warranty coverage and professional after-sales support for our actuator products. Detailed warranty terms, service conditions, and claim procedures are available in the official document below.
SACER SA601-2 specifically engineered for restoring damaged dosing pumps inside PSA Peugeot Citroën BlueHDi AdBlue/SCR Urea Tank Modules. The MGIC-SCR01 Pump Motor Repair Kit replaces the seized, burnt, or noisy internal electric motor caused by long-term chemical crystallization or liquid intrusion.
Restoring full fluid pressure generation (approx. 5–6 Bar) within the AdBlue delivery circuit, this replacement motor resolves pressure delivery codes (such as P20E8 - Urea Pressure Too Low) without requiring the replacement of the complete expensive OEM tank assembly. Built with corrosion-resistant seals and precision bearings, it guarantees extended service life under continuous under-vehicle operation.
R&D Innovation Center
Advanced engineering team with 15+ years of turbo system expertise, utilizing CAD/CAE simulation and rapid prototyping for continuous product innovation.
Comprehensive Testing Lab
Full-spectrum validation including durability cycles, thermal shock (-40°C to +150°C), vibration resistance, and EMC compliance testing.
Quality Management System
IATF 16949:2016 & ISO 9001:2015 certified production with 100% incoming inspection, in-process monitoring, and final performance verification.
From application evaluation to global delivery, SACER provides reliable actuator solutions and services for OEM and aftermarket customers worldwide.
Product Identification & Model Matching
Based on the product information provided by the customer—such as OE number, turbocharger model, or product photos—we provide actuator model identification and matching services to help quickly find the correct replacement.
Flexible Customization & Quality Assurance
We provide flexible customization options supported by strict quality control and validation processes to ensure stable and reliable product performance.
Global Delivery & Technical Support
Our global logistics network and responsive technical support ensure efficient product delivery and long-term cooperation.
SACER provides full warranty and after-sales support. Download the official document below for details.